  5000 Watt DC to AC Modified Sine Wave 24 Volt Power Inverter Modified Sine Wave Power Inverters represent the most economical solution for  powering a large number of appliances. The waveform produced by a Modified  Sine Wave Power Inverter is "blocky" resembling a set of steps whereas the waveform produced by utility companies is smooth much like a curvy road.  Therefore because of the type of waveform the Modified Sine Wave Power  Inverters produce they are suitable for most applications. Modified Sine Wave Power Inverters are more efficient in converting battery power to AC. So if you’re  looking to make a pot of coffee run a heater or air conditioner or appliances  that can withstand occasional electrical noise a Modified Sine Wave Inverter is  a cost-effective solution.     To select the right inverter first determine what devices you would need to run  in the event of a power outage. Then select the appropriate inverter that can  carry the combined wattage requirements of these devices. Some appliances have a start up amperage.
 
  
Features: 
    - 5000W max continuous power 
 
    - Modified     sine wave 
 
    - Volt     meter on front panel to monitor your battery voltage 
 
    - Amp     meter on front panel to monitor your current use (rate at which     battery is drained) 
 
     
    - AC Direct Connect Terminal
 
     
    - Over Temperature LED indicator 
 
    - Over     Load LED indicator 
 
    - Quadruple ac receptacle that can be used with any separate spliter to provide even more outlets
 
     
    - On/off     switch 
 
    - Over     Temperature protection 
 
    - Over     Load protection 
 
    - Single     cooling fan operation thermally controlled
 
    - Internally fuse protected 
 
    - ac     output short circuit protection 
 
    - Auto     reset on most fault conditions 
 
    - Aluminum     case for optimal cooling 
 
    - Pre-wired for remote on/off switch 
 
    - Pre-slotted mounting plate 
 
    - Instruction manual 
 
    - Free 1     year tech support 
 
    - 1 Year     Warranty Parts and Labor 
 
     
Specifications: 
    - Continuous output power: 5000 Watts 
 
    - Surge     power capability (peak power): 10,000 Watts 
 
    - dc input     / operating voltage: 34 to 20 Volts 
 
     
    - Output voltage: 120 Volts ac     +/- 10% 
 
    - Output     wave form: modified sine wave with phase correction 
 
    - Output     frequency: 60 Hz +/- 1 Hz 
 
    - Battery     low voltage alarm: 21.0 +/- 0.5 Volts 
 
    - Battery     low voltage shutdown: 20.0 +/- 0.5 Volts 
 
    - No load     current @ 24V: < 0.4 Amps 
 
    - Full     load efficiency: 90% 
 
    - 1/3 load     efficiency: 95% 
 
    - No load     minimum operating temperature: -15 degrees Celsius 
 
    - Full     load maximum operating temperature: 55 +/- 5 degrees Celsius     (automatic shutdown) 
 
    - AC     Output Socket Type: quadruple Type 2 -3 prong 
 
    - High     input voltage protection: 34.5V 
 
    - Low     input voltage shutdown: 20.0V
 
    - Internal     fuse protection 
 
    - Product     size (L x W x H): 17.5”X 8”X 6” 
 
    - Unit Weight 17 lbs 
 
     
    - Boxed Weight 19 lbs
 
    - UL     maximum recommended per outlet 1500W
  
 
     |